Rapid measurement of binding constants and heats of binding using a new titration calorimeter
Abstract
A new titration calorimeter is described and results are presented for the binding of cytidine 2′-monophosphate (2′CMP) to the active site of ribonuclease A. The instrument characteristics include very high sensitivity, rapid calorimetric response, and fast thermal equilibration. Convenient software is available for instrument operation, data collection, data reduction, and deconvolution to obtain least-squares estimates of binding parameters n, δHo, ΔSo, and the binding constant K. Sample through-put for the instrument is high, and under favorable conditions binding constants as large as 108m−1 can be measured. The bovine ribonuclease A (RNase)/2′CMP system was studied over a 50-fold range of RNase concentration and at two different temperatures. The binding constants were in the 105 to 106m−1 range, depending on conditions, and heats of binding ca. −15,000 cal/mol. Repeat determinations suggested errors of only a few percent in n, ΔHo, and K values over the most favorable concentration range.
References (15)
- LangermanN. et al.
- BiltonenR.L. et al.
- BeaudetteN.V. et al.
Anal. Biochem.
(1978) - McKinnonI.R. et al.
Anal. Biochem.
(1984) - PrivalovP.L.
Adv. Protein Chem.
(1979) - PrivalovP.L. et al.
Adv. Protein Chem.
(1988) - ConnorsK.A.
Cited by (2528)
Molecular recognition of synthetic RNAs by phenothiazinium dyes methylene blue and new methylene blue: Thermodynamic approach
2024, Journal of Molecular StructureMany biological process and function centers around recognition of double stranded RNA as it impacts numerous pathways associated with maturation of cellular RNA. This work assembles an intricate thermodynamic profiling of the phenothaizinium dyes methylene blue and new methylene blue with three double stranded ribonucleic acids, poly(A).poly(U), poly(C).poly(G) and poly(I).poly(C) with aid of thermal helix melting, isothermal titration calorimetry and differential scanning calorimetry experiments. Isothermal titration calorimetry had put forward that highest binding affinity was observed for poly(A).poly(U)-dye binding while the order varied as poly(A).poly(U) > poly(C).poly(G) > poly(I).poly(C). Strong stability of the polynucleotides against heat strand separation characterises the binding. Non-electrostatic component had larger share in parsing of the standard molar Gibbs energy of the binding. The processes' negative change in heat capacity is evidence of how essential hydrophobic forces are. Release of water molecules which are in random orientation mode occurs from RNA's hydrophobic binding pockets. Negative enthalpy and positive entropic change are the two significant features in this hydrophobic binding scenario. Another vital result of enthalpy-entropy compensation has been identified with the binding processes. The findings bear direct and ubiquitous acknowledgement in revitalizing our interest and broadening our horizon towards successful targeting of small molecules to RNAs.
ITC analysis of polydisperse systems: Unravelling the impact of sample heterogeneity
2024, Analytical BiochemistryBinding interactions often involve heterogeneous samples displaying a distribution of binding sites that vary in affinity and binding enthalpy. Examples include biological samples like proteins and chemically produced samples like modified cyclodextrins. Experimental studies often ignore sample heterogeneity and treat the system as an interaction of two homogeneous species, i.e. a chemically well-defined ligand binding to one type of site. The present study explores, by simulations and experiments, the impact of heterogeneity in isothermal titration calorimetry (ITC) setups where one of the binding components is heterogeneous. It is found that the standard single-site model, based on the assumption of two homogeneous binding components, provides excellent fits to simulated ITC data when the binding free energy is normally distributed and all sites have similar binding enthalpies. In such cases, heterogeneity can easily go undetected but leads to underestimated binding constants. Heterogeneity in the binding enthalpy is a bigger problem and may result in enthalpograms of increased complexity that are likely to be misinterpreted as two-site binding or other complex binding models. Finally, it is shown that heterogeneity can account for previously observed experimental anomalies. All simulations are accessible in Google Colab for readers to experiment with the simulation parameters.
Isothermal titration calorimetry analysis of the binding between the maltodextrin binding protein malE of Staphylococcus aureus with maltodextrins of various lengths
2024, Biochemical and Biophysical Research CommunicationsStaphylococcus aureus (S. aureus), a Gram-positive bacterium, causes a wide range of infections, and diagnosis at an early stage is challenging. Targeting the maltodextrin transporter has emerged as a promising strategy for imaging bacteria and has been able to image a wide range of bacteria including S. aureus. However, little is known about the maltodextrin transporter in S. aureus, and this prevents new S. aureus specific ligands for the maltodextrin transporter from being developed. In Gram-positive bacteria, including S. aureus, the first step of maltodextrin transport is the binding of the maltodextrin-binding protein malE to maltodextrins. Thus, understanding the binding affinity and characteristics of malE from S. aureus is important to developing efficient maltodextrin-based imaging probes. We evaluated the affinity of malE of S. aureus to maltodextrins of various lengths. MalE of S. aureus (SAmalE) was expressed in E. coli BL21(DE3) and purified by Ni-NTA resin. The affinities of SAmalE to maltodextrins were evaluated with isothermal titration calorimetry. SAmalE has low affinity to maltose but binds to maltotriose and longer maltodextrins up to maltoheptaose with affinities up to Ka = 9.02 ± 0.49 × 105 M−1. SAmalE binding to maltotriose-maltoheptaose was exothermic and fit a single-binding site model. The van't Hoff enthalpy in the binding reaction of SAmalE with maltotriose was 9.9 ± 1.3 kcal/mol, and the highest affinity of SAmalE was observed with maltotetraose with Ka = 9.02 ± 0.49 × 105 M−1. In the plot of ΔH-T*ΔS, the of Enthalpy−Entropy Compensation effect was observed in binding reaction of SAmalE to maltodextrins. Acarbose and maltotetraiol bind with SAmalE indicating that SAmalE is tolerant of modifications on both the reducing and non-reducing ends of maltodextrins. Our results show that unlike ECmalE and similar to the maltodextrin binding protein of Streptococci, SAmalE primarily binds to maltodextrins via hydrogen bonds. This is distinct from the maltodextrin binding protein of Streptococci, SAmalE that binds to maltotetraiol with high affinity. Understanding the binding characteristics and tolerance to maltodextrins modifications by maltodextrin binding proteins will hopefully provide the basis for developing bacterial species-specific maltodextrin-based imaging probes.
Con A lectin binding by synthetic bivalent arabinomannan tri- and pentasaccharides reveals connectivity-dependent functional valencies
2024, Carbohydrate ResearchLectin Con A, with specificity to interact with α-d-mannopyranoside, achieves tight binding affinity with the aid of optimal multivalent ligand valencies, distances and orientations between the ligands. A series of synthetic arabinomannans, possessing arabinan core and mannan at the non-reducing ends, is studied to assess the above constraints involved with lectin binding in this report. Trisaccharides, with (1 → 2)(1 → 3), (1 → 2)(1 → 5) and (1 → 3)(1 → 5) glycosidic bond connectivities, and a pentasaccharide with mannopyranosides at the non-reducing ends are synthesized. The binding affinities of the mannose bivalent ligands are studied with tetrameric Con A lectin by isothermal titration calorimetry (ITC). Among the derivatives, trisaccharide with (1 → 2)(1 → 3) glycosidic bond connectivity and the pentasaccharide undergo lectin interaction, clearly fulfilling the bivalent structural and functional valencies. Remaining oligosaccharides exhibit only a functional monovalency, defying the bivalent structural valency. The trisaccharide fulfilling the structural and functional valencies represent the smallest bivalent ligand, undergoing the lectin interaction in a trans-mode.
Accurate calculation of affinity changes to the close state of influenza A M2 transmembrane domain in response to subtle structural changes of adamantyl amines using free energy perturbation methods in different lipid bilayers
2024, Biochimica et Biophysica Acta - BiomembranesExperimental binding free energies of 27 adamantyl amines against the influenza M2(22-46) WT tetramer, in its closed form at pH 8, were measured by ITC in DPC micelles. The measured Kd's range is ~44 while the antiviral potencies (IC50) range is ~750 with a good correlation between binding free energies computed with Kd and IC50 values (r = 0.76). We explored with MD simulations (ff19sb, CHARMM36m) the binding profile of complexes with strong, moderate and weak binders embedded in DMPC, DPPC, POPC or a viral mimetic membrane and using different experimental starting structures of M2.
To predict accurately differences in binding free energy in response to subtle changes in the structure of the ligands, we performed 18 alchemical perturbative single topology FEP/MD NPT simulations (OPLS2005) using the BAR estimator (Desmond software) and 20 dual topology calculations TI/MD NVT simulations (ff19sb) using the MBAR estimator (Amber software) for adamantyl amines in complex with M2(22-46) WT in DMPC, DPPC, POPC. We observed that both methods with all lipids show a very good correlation between the experimental and calculated relative binding free energies (r = 0.77–0.87, mue = 0.36–0.92 kcal mol-1) with the highest performance achieved with TI/MBAR and lowest performance with FEP/BAR in DMPC bilayers. When antiviral potencies are used instead of the Kd values for computing the experimental binding free energies we obtained also good performance with both FEP/BAR (r = 0.83, mue = 0.75 kcal mol-1) and TI/MBAR (r = 0.69, mue = 0.77 kcal mol-1).
Metal-binding cyclodextrins: Synthesis and complexation with Zn<sup>2+</sup> and Ga<sup>3+</sup> cations towards antimicrobial applications
2023, Carbohydrate PolymersHighly resistant bacteria producing metallo-β-lactamases (MBLs) to evade β-lactam antibiotics, constitute a major cause of life-threatening infections world-wide. MBLs exert their hydrolytic action via Zn2+ cations in their active center. Presently, there are no approved drugs to target MBLs and combat the associated antimicrobial resistance (AMR). Towards this issue, we have prepared a family of cyclodextrins substituted with iminodiacetic acid (IDA) on their narrow side, while the wider side is either unmodified or per-2,3-O-methylated. The molecules form strong coordination complexes with Zn2+ or Ga3+ cations in aqueous solution. Free and metal-complexed compounds have been thoroughly characterized regarding structures, pH-dependent ionization states, distribution of species in solution, pKa values and metal-binding constants. At neutral pH the multi-anionic hosts bind up to four Zn2+ or Ga3+ cations. In vitro, 50 μΜ of the compounds achieve complete re-sensitization of MBL-producing Gram-negative clinical bacterial strains resistant to the carbapenems imipenem and meropenem. Moreover, the radioactive complex [67Ga]Ga-β-IDACYD prepared, displays high radiochemical purity, sufficient stability both overtime and in the presence of human plasma apo-transferrin, thus providing an invaluable tool for future biodistribution and pharmacokinetic studies of β-IDACYD in vivo, prerequisites for the development of therapeutic protocols.